Package 5 : Willem EPROM Programmer PCB50B +27Cxxxx ( EPROM 16bit ) Adapter + 5 PCS x PCB SSOP 8, SOIC 8 (150mil ,209 mil) to DIP 8 Adapter + PLCC Extractor

[A55] Package 5 : Willem EPROM Programmer PCB50B + 27Cxxx / PCB SSOP8, SOIC8 Adapter + Extractor

• 1.) Willem EPROM Programmer PCB50B^©
• 2.) CD Installation Software and Manual
• 3.) USB Cable (for power supply)
• 4.) Computer cable DB25 (for data communication)
• 5.) [ PE01 ] PLCC Extractor
• 6.) [ B12 ] 27Cxxxx ( EPROM 16bit ) Adapter
• 7.) [B30] 5PCS x PCB SSOP8, SOIC8 (150,209 mil) to DIP8 Adapter + Pin Header

• This is the newest Willem EPROM Progrmmaer from the original producer/developer of Willem EPROM Programmer version: PCB3b, PCB3.5, PCB4C, PCB4.5C, PCB50 and software versions:0.98D11, 0.98D10, 0.98D9, 0.98D5 , 0.98D2, 0.97ja, 0.97j, 0.97i+, 0.98i or (0.97i), 0.97h and 0.97g.
• This new hardware version (PCB50) is is more STABLE than all old PCB version and increase supports 3V3-3V6 SPI Flash devices. * SPI flash chips are found on new motherboards, DVD burners, hard drives etc.
• Updated Newest Software Willem EPEOM PCB50a(0.98D12)© support the SPI FLASH chips (AMIC, ATMEL, EON, MXIC, Numonyx (ST), P-FLASH, SPANSION, SST, WINBOND, GigaDevice, MicroChip ) more than the all version and improved the models of algorithms focusing on SST 25 series .
• Latest software 0.98D12 improve W39V040, W39V040A; W39V040FA; W39V040BP; W39V040FBP; W39V040FCP; W39V040FCPZ; W39V040FBPZ; W39V080APZ; W39V080AP; W39V080FA; W39V080FAZ Programming to flash, 100% perfect.
• You are buying directly from the manufacturer.

• Refreshing , Upgrading, Programming BIOS chips.
• Copier, Fax machine, Printer main board maintaining or repairing.
• VCD, DVD, Color TV maintaining or repairing.
• Neon Light Controller code writing.
• MCU development - programming for MCS-51 series, AVR series and PIC series MCU.
• Repairing, reading, writing, programming PC motherboard BIOS Chips.
• Upgrade the chip in your cars computer.
• Programming MicroChip PIC Micros.
• Programming ATMEL AVR Micros.

• The newest Willem EPROM PProgrammer PCB50B©. It can program up to 20% - 50% faster than old version of Willem EPROM Programmer have Built-in PLCC32 and PLCC Firmware HUB/LPC on-board
• Supported program
• - SPI FLASH chips VCC(3.6V)
• - EPROM, EEPROM, Serial (I2C) EEPROM, Microwire EEPROM, Microchip PIC
• - FLASH Burner (Vpp 12.5V, 21V, 25V), Serial Peripheral Interface (SPI)
• - Micro controllers MCS-51, MCS-48
• - Test nonvolatile SRAM, static RAM, ATMELand etc.
• Willem EPROM PProgrammer PCB50© and PCB4.5C can support the chip 29/39/49LVxxx (Low Voltage 3.3V).
• Uses the power supply from the USB Port or AC/DC adaptor power
• Note: Higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used.
• Able unprotect the AM29F040B flash memory chip.
• The back of circuit board is covered by a sheet of perspex and completely protected from a short circuit.
• Supports Win9X, Me, XP, NT, 2000 and VISTA operating systems
• Updated software Willem EPEOM PCB50a(0.98D12)© only support The newest Willem EPROM PProgrammer PCB50B©
• IMPROVED SUPPORT CHIPS:
• --- AMIC ---
• A25L05P-B, A25L10P-B, A25L20P-B, A25L05P-T, A25L10P-T, A25L20P-T, A25L512, A25L010, A25L020, A25L040, A25L080;, A25L016
• --- ATMEL ---
• AT25F512, AT25F1024, AT25F2048, AT25FS010, AT25FS020, AT25F010, AT25F040, AT25DF021, AT25DF041, AT25DF161, AT25DF321, AT25DF641, AT25D081A
• --- EON ---
• EN25B05, EN25B10, EN25B20, EN25B40, EN25B80, EN25B16, EN25B32, EN25B64, EN25P05, EN25P10, EN25P20, EN25P40, EN25P80, EN25P16, EN25P32, EN25P64, EN25D80, EN25D16, EN25F20, EN25F40, EN25F80, EN25F16, EN25T80
• --- MXIC ---
• MX25L512, MX25L1005, MX25L2005, MX25L4005, MX25L8005, MX25L1605, MX25L3205, MX25L6405
• --- Numonyx (ST) ---
• M25P05, M25P10, M25P20, M25P40, M25P80, M25P16, M25P32, M25P64, M25PE10, M25PE20, M25PE40, M25PE80, M25PX80, M25PX16, M25PX32, M25PX64
• --- P-FLASH ---
• Pm25LV512, Pm25LV010, Pm25LV020, Pm25LV040, Pm25LV080, Pm25LV016
• --- SPANSION ---
• S25FL004A/040A, S25FL008A, S25FL040A-T, S25FL040A-B, S25FL016A, S25FL032A, S25FL064A.S25L128
• --- SST ---
• SST25LF020A, SST25LF040A, SST25LF080A, SST25VF512, SST25VF010, SST25VF020, SST25VF020, SST25VF040, SST25VF020B, SST25VF040B, SST25VF080B, SST25VF016B, SST25VF032B, SST25VF064C
• --- WINBOND ---
• W25P10, W25P20, W25P40, W25P80, W25P16, W25P32, W25X01, W25X02, W25X04, W25X08 , W25X16, W25X32, W25X64 , W25B40A,
• --- GigaDevice ---
• GD25F40, GD25F80, GD25D40, GD25D80, GD25T80
• --- ESMT ---
• F25L004A, F25L008A, F25L016A, F25L032PA, A, , F25L04UA, F25S04PA, F25S08PA, F25S16PA, F25L32QA
• --- MicroChip ---
• 25LC(AA)1024
• Can be expanded by adding various adapters (Optional)
• -. PIC + adapter, 16 bit 40pin/42pin Adapter, PLCC32, PLCC44
• -. ATMEL AT89/MCS-51, FWH/HUB adapter
• -. TSOP48, TSOP32 Adapter and more.
• Uses the power supply from a USB port or from an optional power supply or plug pack (not supplied)
• Note: Higher Vcc voltages (5.6v and 6.2v) will be available when an external AC power supply is used. The back of circuit board is covered by a sheet of perspex and completely protected from a short circuit.